laporan cisco 3.6.2

 

            RENI MEYLANY

            XI TJKT B 

PENGERTIAN

Packet Tracer adalah sebuah perangkat lunak simulasi jaringan yang dikembangkan oleh Cisco Systems. Beberapa manfaat dari Packet Tracer adalah: Dengan Packet Tracer, Anda dapat membuat dan menguji jaringan dengan berbagai perangkat jaringan seperti router, switch, server, dan lain-lain

CARA CONFIGURASI

1. membuat topologi sepeti yang di perintahkan terdapat 2 switch dan 2 pc

2.lalu klik S1 dan codding seperti berikut:

Switch>en

Switch#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#hostname S1

S1(config)#enable secret class

S1(config)#line console 0

S1(config-line)#password cisco

S1(config-line)#login

S1(config-line)#exit

S1(config)#line vty 0 4

S1(config-line)#password cisco

S1(config-line)#login

S1(config-line)#exit

S1(config)#service password-encryption

S1(config)#banner motd $authorized access is only! $

S1(config)#exit

S1#

%SYS-5-CONFIG_I: Configured from console by console

S1#copy running-config startup-config

Destination filename [startup-config]? 

Building configuration...

[OK]

S1#

S1#conf t

Enter configuration commands, one per line. End with CNTL/Z.

S1(config)#int vlan 10

S1(config-if)#name Management

               ^

S1(config-if)#exit

S1(config)#vlan 10

S1(config-vlan)#

%LINK-5-CHANGED: Interface Vlan10, changed state to up

S1(config-vlan)#name Management

S1(config-vlan)#vlan 20

S1(config-vlan)#name Sales

S1(config-vlan)#vlan 30

S1(config-vlan)#name Operations

S1(config-vlan)#vlan 999

S1(config-vlan)#name ParkingLot

S1(config-vlan)#vlan 1000

S1(config-vlan)#name Native

S1(config-vlan)#int vlan 10

S1(config-if)#ip address 192.168.10.11 255.255.255.0

S1(config-if)#int vlan 20

S1(config-if)#ip address 192.168.20.11 255.255.255.0

S1(config-if)#int vlan 30

S1(config-if)#

S1(config-if)#ip address 192.168.30.11 255.255.255.0

S1(config-if)#

S1(config-if)#

S1(config-if)#int range f0/2-5, f0/7-24, g0/1-2

S1(config-if-range)#switchport mode access

S1(config-if-range)#switchport access vlan 999

S1(config)#int f0/6

S1(config-if)#switchport mode access

S1(config-if)#switchport access vlan 20

S1(config-if)#

S1(config-if)#int f0/1

S1(config-if)#switchport mode trunk

S1(config-if)#switchport trunk native vlan 1000

S1(config-if)#switchport trunk al

S1(config-if)#switchport trunk allowed vlan 10

3. setelah s1 selesai klik s2 lalu codding s2 sebagai berikut

Switch>en

Switch#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#hostname S2

S2(config)#line console 0

S2(config-line)#exit

S2(config)#enable secret class

S2(config)#line console 0

S2(config-line)#password cisco

S2(config-line)#login

S2(config-line)#exit

S2(config)#line vty 0 4

S2(config-line)#password cisco

S2(config-line)#login

S2(config-line)#exit

S2(config)#service password-encryption

S2(config)#banner motd $authorized access is only! $

S2(config)#exit

S2#

%SYS-5-CONFIG_I: Configured from console by console

S2#copy running-config startup-config

Destination filename [startup-config]? 

Building configuration...

[OK]

S2#

S2#

S2#conf t

Enter configuration commands, one per line. End with CNTL/Z.

S2(config)#vlan 10

S2(config-vlan)#name Management

S2(config-vlan)#vlan 20

S2(config-vlan)#name Sales

S2(config-vlan)#vlan 30

S2(config-vlan)#name Operations

S2(config-vlan)#vlan 999

S2(config-vlan)#name ParkingLot

S2(config-vlan)#vlan 1000

S2(config-vlan)#name Native

S2(config)#int vlan 10

S2(config-if)#

%LINK-5-CHANGED: Interface Vlan10, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10, changed state to up

S2(config-if)#ip address 192.168.10.12 255.255.255.0

S2(config-if)#exit

S2(config)#int range 192.168.10.12

%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (1), with S1 Fexit

S2#

%SYS-5-CONFIG_I: Configured from console by console

S2#conf t

Enter configuration commands, one per line. End with CNTL/Z.

S2(config)#int range f0/2-17, f0/19-24, g0/1-2

S2(config-if-range)#switchport mod

%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (1), with S1 FastEthernet0/1 (1000).

% Incomplete command.

S2(config-if-range)#switchport mode access

S2(config-if-range)#switchport access vlan 999

S2(config-if-range)#exit

S2(config)#int f0/18

S2(config-if)#switchport mode access

S2(config-if)#switchport acce

%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (1), with S1 FastEthernet0/1 (1000).

% Incomplete command.

S2(config-if)#switchport access vlan 30

S2(config-if)#exit

S2(config)#int f0/1

S2(config-if)#switchport mode trunk

S2(config-if)#switchport trunk native vlan 1000

S2(config-if)#%SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking FastEthernet0/1 on VLAN1000. Port consistency restored.

%SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking FastEthernet0/1 on VLAN0001. Port consistency restored.

S2(config-if)#switchport trunk allowed vlan 20

S2(config-if)#

4.masukan ip addres pc a

5.masukan ip address pc b