laporan cisco 3.4.6

 

            RENI MEYLANY

            XI TJKT B

PENGERTIAN

Packet Tracer adalah sebuah perangkat lunak simulasi jaringan yang dikembangkan oleh Cisco Systems. Beberapa manfaat dari Packet Tracer adalah: Dengan Packet Tracer, Anda dapat membuat dan menguji jaringan dengan berbagai perangkat jaringan seperti router, switch, server, dan lain-lain

CARA CONFIGURASI

1.tambahkan pc a dan b , switch 1 dan 2

2.lalu tambahkan kabel

    pc-a f0 kabel ijo ke switch 1 f0.6

    pc-b f0 kabel ijo ke switch 2 f0/18

    switch 1 ke switch 2 pake kabel oren dari f0/1 ke f0/1

3.klik pc a lalu ke destop klik terminal

4.codding pc-a

Switch>en

Switch#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Switch(config)#hostname S1

S1(config)#no ip domain-lookup

S1(config)#enable secret class

S1(config)#line console 0

S1(config-line)#password cisco

S1(config-line)#login

S1(config-line)#exit

S1(config)#line vty 0 4

S1(config-line)#password cisco

S1(config-line)#login

S1(config-line)#exit

S1(config)#service password-encryption

S1(config)#banner motd #authorized access user only! #

S1(config)#int vlan 1

S1(config-if)#ip address 192.168.1.11 255.255.255.0

S1(config-if)#no shutdown

S1(config-if)#

S1(config-if)#exit

S1(config)#int range f0/2-5, f0/7-24, g0/1-2

S1(config-if-range)#end

S1#

S1#clock set 11:00:00 22 January 2022

S1#coppy running-config startup-config

5.lalu ke pc b codding seperti pc-a

Switch>en

Switch#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Switch(config)#hostname S2

S2(config)#no ip domain-lookup

S2(config)#enable secret class

S2(config)#line console 0

S2(config-line)#password cisco

S2(config-line)#login

S2(config-line)#exit

S2(config)#line vty 0 4

S2(config-line)#password cisco

S2(config-line)#login

S2(config-line)#exit

S2(config)#service password-encryption

S2(config)#banner motd #authorized access user only! #

S2(config)#int vlan 1

S2(config-if)#ip address 192.168.1.12 255.255.255.0

S2(config-if)#no shutdown

S2(config-if)#

S2(config-if)#exit

S2(config)#int range f0/2-17, f0/19-24, g0/1-2

S2(config-if-range)#end

S2#

S2#clock set 11:00:00 22 January 2022

S2#copy running-config startup-config

Destination filename [startup-config]? 

Building configuration...

[OK]

6.lalu ke pc-a dan pc-b tambahkan coddingan seperti dibawah ini:

S1#conf t

S1(config)#vlan 10

S1(config-vlan)#name Operations

S1(config-vlan)#vlan 20

S1(config-vlan)#name Parking_lost

S1(config-vlan)#vlan 99

S1(config-vlan)#name Management

S1(config-vlan)#vlan 1000

S1(config-vlan)#name Native

S1(config-vlan)#end

S1(config)#int f0/6

S1(config-if)#sswitchport mode access

S1(config-if)#switchport mode access

S1(config-if)#switchport access vlan 10

S1(config-if)#exit

S1(config)#int vlan 1

S1(config-if)#no ip address

S1(config-if)#int vlan 99

S1(config-if)#ip address 192.168.1.11 255.255.255.0

S1(config-if)#end

S1(config)#int f0/1

S1(config-if)#switchport mode trunk

S1(config-if)#exit

S1(config)#int f0/1

S1(config-if)#switchport trunk native vlan 1000

7.lalu klik pc-a klik destop tambahkan ip configuration

8.tambahkan juga ip pc-b